Build the volume: The available volume of the print chamber for the 512 x models is 800 x 800 x 800 mm and the horizontal diagonal is 1130 mm. The steel welded chassis is very stable and rigid, it avoids the deformations caused by the acceleration and deceleration of the high speed heads. The print speed can reach 300 mm / as a moving speed.
The tray is grooved metal allowing the suction of a film deposited on the tray where the object will be constructed. This film, when the suction is stopped, makes it easy to take this object out of the building chamber. The atmosphere of the room is maintained in temperature to avoid deformations of the object being built. The filaments are stored in a parboiled compartment, with a capacity of 4 reels of 10 kg of filament (Format according to the choice of your filament supplier).
Extruders and heads:
3D printers are equipped with extruders that we have developed in me workshop.
These extruders are designed not to be clogged by plastic waste, filament insertion is very easy. They can print up to 300mm / s. They are all metal, giving them great strength and reliability. The high-temperature print head (480 ° C) makes it possible to print most filaments available on the market, in diameter of 1.75mm. The head is supplied with a nozzle of 0.5 mm, which allows to have a good precision and a good quality of finish. You can opt for a larger diameter. The printers are equipped with 1 print head, (3 optional print heads, allowing the printing of multi-material or multicolored parts)
Mechanical and electronic
The mechanics and electronics are handled by the Smoothie Board.
They have an electronic device allowing, once the set tray, to make the automatic leveling of the tray under the head by magnetic detection, whenever you wish it.
They are equipped with end of reel detection with automatic pausing and resume printing as soon as you have loaded a new reel. Maintenance is very easy and requires only a few operations apart from cleaning.
Control: The printer is controlled via a 7 "color touch screen. Parts files can be downloaded to the printer via Ethernet, USB port or SD card