The Multi1000 and the Multi600 are part of the same machine game. They are therefore identical in appearance. Only the interior / exterior dimensions change.
The printing chamber available volume for this specific model is 1000 x 1000 x 1000 mm and horizontal diagonal 1400 mm. The very stable and rigid steel welded frame avoid deformations caused by high speed heads acceleration and deceleration. Its printing speed is 3 times faster than existing machines.
The heated printing chamber (up to 200°C) enables a perfect dimensional stability of large size parts and allow to print technical plastic.
The high temperature printing head (480°C) can print most of filaments available on the market, from the common ones (PLA, ABS..) up to the most sophisticated (ULTEM, PEEK …). The printing head can process 3 different filaments (option), thus enabling multi-material or multicolour parts printing.
The filament are stored in a separated and closed compartment with a capacity 4 spools capacity (each 2kg of filament) or 2 spools of 10kg.
The printed parts can be easily removed from the flexible film covering the printing tray (not for PLA) on vaccum bed.
The printer can be controlled via a 7 ‘’ colour touch screen.
Parts files can be upload into the printer via Ethernet, USB Port or SD-Card.
The machine configuration and the operating settings are fully open.You can modify these operating parameters to perform tests on filaments of your choice.This machine is perfect for research centers made of polyler materials.